What's Chip Tuning?
With chip tuning, we change the parameters of the engine control in order to achieve performance from the engine.
What the Chip Tuning Tool can bring to your car?
ECU Chip Tuning Tool is a programmer that used for reading and programming ECU content of EEPROM files (or ROM memory with maps EEPROM physically not present). Online remapping removes some of the manufacturer's restrictions, such as electronic speed limits, maximum speed limits, ADBLUE/SCR OFF, EDC17 Checksum EEPROM and EGR OFF etc. Chip tuning will optimize your car's software to maximize its potential.
YOBDII provide popular universal ECU Chip Tuning for car remapping, including: PCMtuner, Chip TuningKit KT200, I/O Prog, ECU Bench Tool, Ktag, Kess v2, KTMflash, CGDI FC200 etc.
FC200 ECU programmer is designed for ECU/ EGS clones. Supports data processing, ISN read and write, disassembly matching, VIN modification, and DTC shielding, etc.
EMT master board, Don't need pay maual cost and month fee.32 modules, support thousands of car brands, read and write ECU and GearBox ,power upgrade tool,clone ECU to read and write. Best chip tuning tools.
PCMtuner tool can read and write ECU data through OBD, BENCH, and BOOT modes. PCMtuner performs a complete backup of ECU data, easy ECUs clones, and power upgrades. It can also support read and write gearboxes. According to the data readout via PCMtuner t
The KTM200 software allows you to forcibly write (forcible clone) without checksumming and supports forcibly reading and writing unknown ECUs with supported chip models.
Supports connection by Bench, Boot, OBD for more than 98% of ECUs. No need to open the shell and punch holes to protect the original car.
I/O Terminal is a software and hardware solution designed for work with a great number of ECUs, automatic transmissions,BSI installed in V-AG, Mitsubishi, Ma-zda, F-ord, Nis-san,, Su-baru, Su-zuki, O-pel, V-olvo, Al-fa Romeo, F-iat, Ja-guar, Land-Rover, L
Upa-usb 2014 is the full set with all adapters,The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable.
FoxFlash is a powerful tool for ecu and tcu, supports a lot of mode
AT-200 support BMW ECU Data reading, writing and clone, like MSV90 MSD85 MSD87 N2055 B38 B48
1. It must be used online (PLEASE connect internet to use it); 2. The time of the computer must be adjusted to be accurate local time; 3. You must install V6.26 register file; 4. Only support English WINDOWS system, please do not use other language sys
This tool is able to read out the memory content of many commercial EEPROM or micro controller devices, and change the contents of binary files on your PC then write back to the target device. You have to remove the ECU circuit from the car, and work with
FGTech Galletto 4-Master this new system developed with high-speed USB2 technology is the fastest and most secure product on the market, it is easy to install and use,. Our system comes furnished complete with all Car, Truck, Motorbike, Marine, BDM MPCxx,
The MPPS modern interface that allows you toread and write memory from the on-board computer through the diagnostic connector. 3)Supports the latest drivers EDC16, EDC17, MED9.x, For Siemens PPD1 / x, EDC15, ME7.xi much more ...
This Fetrotech tool is mainly based on the Bench mode (that is, reading and writing ECU flash and EEPROM without opening the cover). The black color Fetrotech tool can be used independently or used with pcmtuner.
ECU Bench Tool is a universal bench service tool.The software automatically detects the ecu and memory types, which simplifies the process for the user. Access to the available memories is then granted, the software allows you to individually read / write
XPROG V6.50 dongle isn't compatible with older version Xprog. You are not allowed to update from the older version Xprog V5.55 V5.60 V5.70 V5.84 V6.12 to this newest V6.26 XPROG-M Dongle.
Make the Universal tool - CARPROG inside have powerful 16-bit MPU and full set of automotive interface drivers. In basic version you will get hardware with extra functions: 12 input/output pins for EEPROM in-circuit programmer, future possibility's to ma
If you got KTM BENCH 1.2 ,KTMOBD, KTMFLASH, KTM100 3 in 1 and need new functions of PCMtuner, you can just buy a new dongle without sending back the old one.
Add Buzzer WFs = Infine, BCR112 NPN Digital Transistor 27E = ON Semiconductor NUP2105LT1G 6DW = NXP BC817,215 NPN Bipolar Transistor A6c =MMUN2113LT1G / MMUN2113LT3G K5B = BC807-25-7-F PNP Bipolar Transistor Using imported Japanese Murata filter NFE
KESS V5.017 and KTAG V7.020 both are universal Petrol & Diesel car/truck/tractor/motorcycle ECU Chip Tuning tools But KESS v5.017 works better for more 12V gasoline cars, K TAG V7.020 works better for more 12V Diesel Cars and 24V trucks/tractors/motorcy
1. Can support car / truck / tractor / bike! KESS V5 supports vehicle according to Motor. So V5.017 can support new vehicle! 2. Latest Firmware Version: V5.017, Latest Software version: V2.53 3. 100% no token limitation for all vehicles! So V5.017 is us
Red KESS 5.017 Install/User Note Model name:Kess V2 Master Software Version: V2.53 (Newest) Fireware Version: V5.017 Update:By link Car Models:For Multi-cars and trucks,no year limited Languages:English/ German/ Spanish/ Italian/ Portuguese/ French
The OpenPort 2.0 combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress.
Adjust a multitude of parameters such as spark, fuel, RPM limits, fan temps and speeds, transmission shift points and pressures, exhaust valve control, speedometer settings and many more. Then, write these changes back to the vehicle's various control m
Excellent recovery functions. In some cases, MPPS can recover ECU which other tools can not even make communications. On certain controllers, it even works when no program is present (a blank memory)
The Fetrotech tool supports ECU function repair, ECU clone, or support chip tuning modification,Supports MG1 MD1 ECU and BENCH Read MED9 and EDC16, and also support MEDC17 series.
1. ECU maintenance, chip tuning DTC code removal of professional reading and writing equipment covering 99% of the models on the market. 2. TCU encoding and cloning functions. 3. Support OBD/BENCH/BOOT/BDM/JTAG. 4. Read and write Bosch MD1 and MG1 ECUS
Orange 5 super pro programmer is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macro language for writing down protocols, which gives fast and easy capability to add new typ
OEM Orange5 V1.37 V1.36 Professional Programming Device With Full Packet Hardware and Enhanced Function Software
Orange 5 is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macro language for writing down protocols
KT200 ll ECU Programmer is a complete tool for reading and programming engine control units via OBD and via the Boot mode and Jtag systems.
Orange5 Programmer V1.42 Full Activation New Upgraded Orange 5 V1.42 Super Pro Professional ECU Programming Device Repair Tools
1.KTM200 67 Modules in 1. 2.Update Version of Renolink OBD2 Renault & KTM1.20 BENCH ECU Programmer. 3.Newly Added 200 BoschECU, MED/EDC17 Read and Write without opening the shell.
